Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20
The AirTAC Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20
The AirTAC SAIJ100X175-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 155 and 175 mm. Delivering a robust 3927 N of push force at 0.5 MPa, it is built to handle demanding actuation tasks while maintaining standard ISO 15552 mounting dimensions.
This model features a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered ports. It includes adjustable air cushions at both ends to manage kinetic energy, but note that these cushions and the rear stopper only decelerate the load; they do not hold it without live air pressure. For position holding, consider a SAIL or BSAI series cylinder.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20 Is Used
Machine Changeover
Dial in the exact retraction end-stop within the 155-175 mm window when switching product sizes on a packaging line, eliminating the need to swap out the entire actuator.
End-Position Tuning
Fine-tune the stroke at commissioning to compensate for mechanical tolerances, ensuring the 3927 N push force hits the exact target point without adding external stopper blocks.
Corrosion-Resistant Actuation
Leverage the SUS304 stainless steel rod in environments requiring higher moisture or chemical resistance while maintaining standard ISO 15552 footprint compatibility.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20 the Right Cylinder?
Choose this 100 mm bore when you need higher thrust than a neighboring 80 mm cylinder, which provides 2513 N of push force at 0.5 MPa. The SAIJ100X175-20 is selected over a fixed-stroke SAI when a machine setup requires a variable end-stop to dial in the exact retraction point during commissioning or product changeover. When matching an ISO 15552 replacement, verify the 100 mm bore, 175 mm stroke, 20 mm adjustment, PT G1/2 port, and standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20 FAQ
At an operating pressure of 0.5 MPa, this 100 mm bore cylinder provides a push force of 3927 N and a pull force of 3681 N. It can reach a maximum push force of 7068 N at 0.9 MPa.
The rear adjusting screw allows you to shorten the effective stroke by up to 20 mm, creating a usable travel window of 155 to 175 mm. This stopper sets the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX175-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.