Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30
The AirTAC Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø100mm bore and 230mm stroke, G1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke230 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30
The AirTAC SAIJ100X230-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 230 mm travel by up to 30 mm. This creates a usable end-position window of 200 to 230 mm, perfect for fine-tuning machine setup without adding external stops. It delivers robust thrust, generating 5497 N of push force at 0.7 MPa.
This specific configuration features a SUS304 stainless steel rod (material code B) for superior corrosion resistance and uses PT tapered ports sized at G1/2. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily add CMSE or DMSE switches later if positioning feedback becomes necessary.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30 Technical Specifications
| Model | Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30 Is Used
Product Changeovers
Dial in the exact 200 to 230 mm end-stop during format size changes without swapping hardware or repositioning fixed stops.
Heavy Pressing
Leverage the 7068 N push force at 0.9 MPa for pressing operations requiring precise final position tuning at the workpiece.
Machine Commissioning
Fine-tune the retract end position during initial setup to perfectly time machine sequences without machining custom spacers.
Is the Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30 the Right Cylinder?
Choose this 100 mm bore when you need heavy thrust—such as 5497 N at 0.7 MPa or 7068 N at 0.9 MPa—that a smaller 80 mm bore (providing 3518 N at 0.7 MPa) cannot achieve. The adjustable stroke is ideal for production lines running varied product sizes, letting you shift the end-stop during changeovers rather than physically swapping the cylinder. To replace this cylinder, match the 100 mm bore, 230 mm stroke, 30 mm adjustment, PT G1/2 port, and SUS304 rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the 230 mm stroke is under 300 mm, side-load stress is manageable, but always ensure the rod end is adequately guided. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For dead-load holding, consider an external rod lock or the AirTAC SAIL series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30 FAQ
At 0.7 MPa it provides 5497 N of push force and 5147 N of pull force. At 0.9 MPa, the push force increases to 7068 N.
The rear adjuster screw lets you shorten the 230 mm nominal stroke by up to 30 mm, providing a usable travel window of 200 to 230 mm. It functions as a mechanical stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ100 Adjustable Cylinder SAIJ100BX230-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.