
The AirTAC SE50 Standard Cylinder SE50X100SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X100SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Driven by a 50 mm bore and 100 mm stroke, it uses a PT1/4 port and a 20 mm hard-chrome piston rod with an M16x1.5 thread. The square extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies sensor placement.
This configuration includes the -S magnet for position sensing and an FTC centre trunnion mounting accessory. The integrated magnet interfaces directly with AirTAC CMSE reed and DMSE electronic switches fitted into the multiple sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X100SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push at 0.5 MPa required to fold heavy corrugated cardboard flaps on high-speed packaging lines, utilizing the 100 mm stroke to clear the product path during retraction.
Leverages the FTC centre trunnion to articulate a routing gate on a conveyor, absorbing side-load forces while guiding heavy pallets onto secondary packaging tracks.
Secures aluminum castings inside a machining center, using the adjustable pneumatic cushion to soften the 100 mm stroke end-stop and prevent workpiece deformation during rapid clamping.
When sizing this 50 mm bore actuator, compare its 982 N push at 0.5 MPa against your load requirements. If you need less force, stepping down to the 40 mm bore yields 628 N of push, while stepping up to the 63 mm bore provides 1559 N. Because this is a double-acting cylinder, it relies on continuous air pressure to move and hold the load; if your application loses air, the piston will drift, meaning you must specify a BSE rod lock variant for fail-safe load holding.
As a true ISO 15552 profile cylinder, the SE50X100SFTC is dimensionally interchangeable with other ISO 15552 cylinders, ensuring a direct replacement that shares standardized mounting hardware. This specific model includes the FTC centre trunnion mount for pivoting articulation, the -S magnet for CMSE or DMSE sensors, and a PT1/4 port thread.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder outputs 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X100SFTC is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the 50 mm bore, 100 mm stroke, PT1/4 port, and standardized FTC trunnion mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.