
The AirTAC SE50 Standard Cylinder SE50X100SLB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X100SLB is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Driven by filtered air over a 0.15-1.0 MPa operating range, it achieves smooth motion across a 30-800 mm/s speed band. This specific configuration includes an LB foot mounting bracket for rigid base anchoring and a built-in magnetic piston for position detection.
Unlike traditional tie-rod bodies, its square extruded aluminum barrel lacks external protruding rods, yielding a flush, corrosion-resistant profile that mounts cleanly against machine frames. The field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard mechanical impacts without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X100SLB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push at 0.5 MPa required to fold heavy corrugated cardboard flaps on high-speed packaging lines, utilizing the 100 mm stroke for rapid cyclic actuation.
Leverages the LB foot mount to rigidly anchor a routing gate on a beverage conveyor, using the built-in magnet and DMSE sensors to confirm gate position before product transfer.
Acts as an adjustable back-gauge stop in a sheet metal bending station, where the flush extruded profile allows the cylinder to sit compactly against the machine bed without tie-rod interference.
Selecting this 50 mm bore makes sense when your application requires the 982 N push at 0.5 MPa or up to 200 kgf at 1.0 MPa. If your load is lighter, you can step down to the 40 mm bore which provides a 628 N push, saving valuable space and air volume. For heavier dynamic loads, the 63 mm bore offers a 1559 N push for added thrust margin. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve is centered; use a BSE rod lock variant if the mechanism must hold a vertical load safely without live pressure.
This model is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders without altering your existing mounting footprint. It carries a PT1/4 port, an M16x1.5 rod thread, and the LB foot mount accessory. The integrated -S magnet enables precise end-position signaling when paired with AirTAC CMSE reed or DMSE electronic sensors.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides a 982 N push and an 825 N pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X100SLB is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint, 50 mm bore, 100 mm stroke, and PT1/4 port locations. You can drop it directly into existing machinery designed for standard ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.