
The AirTAC SE50 Standard Cylinder SE50X100SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X100SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. Delivering a robust 982 N of push force at 0.5 MPa, it is purpose-built for mid-range actuation. The square extruded aluminum barrel omits external tie rods, yielding a completely flush, corrosion-resistant body that mounts cleanly to machine frames while maximizing structural rigidity.
This 50 mm bore unit features a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors across its three lateral grooves. Equipped with an NBR seal, it operates reliably within standard temperature ranges, while the field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration for moving loads.
| Model | Airtac SE50 Standard Cylinder SE50X100SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Driving the folding arms on automated packaging lines, utilizing the 982 N push force to reliably erect and square corrugated cartons at high cycling rates.
Actuating routing gates on flat-belt conveyors, where the 100 mm stroke provides the precise linear throw needed to redirect heavy product pallets between processing lanes.
Engaging secondary workholding fixtures on machining centers, using the NBR seal and adjustable cushioning to maintain steady grip pressure without harsh end-impacts.
If your application requires less force, the 40 mm bore provides 628 N of push at 0.5 MPa; stepping up to the 63 mm bore yields 1559 N for heavier payloads. The SE50X100SN is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders without altering mounting footprints. It utilizes a PT1/4 port and a 20 mm rod with an M16x1.5 thread. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. For position holding without live air pressure, a BSE rod lock or external pilot-operated check valve is required.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X100SN delivers 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders. The field-adjustable air cushion at both ends is a real pneumatic deceleration mechanism, not a fixed rubber bumper, allowing you to tune end-stop softening for high-speed loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.