
The AirTAC SE50 Standard Cylinder SE50X105 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 105mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X105 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving three dedicated sensor grooves open for tracking.
This specific SKU lacks the built-in magnet option, meaning it arrives without position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a setscrew, softening hard impacts without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X105 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 982 N of push at 0.5 MPa to snap corrugated carton flaps into position on packaging lines, utilizing the 105 mm stroke for rapid, short-cycle actuation.
Actuates a pneumatic diverter arm to sort medium-weight boxes between conveyor belts, benefiting from the extruded barrel's flush mounting and corrosion resistance.
Opens and closes a heavy machine tool safety door, where the field-adjustable air cushion ensures the 105 mm travel slows gently without slamming the end caps.
If 982 N of push at 0.5 MPa is too much for your payload, stepping down to the 40 mm bore trims that output to 628 N. Conversely, demanding heavier cycles can step up to the 63 mm bore, which raises push force to 1559 N. Because this is a standard 105 mm stroke, it drops directly into existing ISO 15552 footprints using LB or FA mounts and a PT1/4 port.
Keep in mind that a plain SE cylinder cannot hold a load if air pressure drops or the valve centers; the piston will drift. For critical drop prevention, consider the BSE rod-lock variant. Additionally, while the 20 mm rod handles moderate side loads, any stroke over 300 mm on this profile cylinder warrants an external guide rail to prevent rod-bearing bending.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X105 delivers a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force reaches 1374 N, with a maximum push of 200 kgf at 1.0 MPa. It features a 50 mm bore, 105 mm stroke, PT1/4 port, and operates at speeds between 30-800 mm/s.
Yes, the SE50X105 is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using existing mounting hardware and PT1/4 porting. Note that this specific SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.