
The AirTAC SE50 Standard Cylinder SE50X105S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 105mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X105S is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise pneumatic control. It delivers a robust 982 N push force at 0.5 MPa, making it well-suited for moderate-load industrial actuation. The extruded aluminum barrel design omits external tie rods entirely, yielding a compact, corrosion-resistant footprint that mounts flush against machine frames.
This specific configuration includes a built-in magnet (S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Furthermore, the field-adjustable air cushion at both stroke ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard mechanical stops to extend component lifespan.
| Model | Airtac SE50 Standard Cylinder SE50X105S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force at 0.5 MPa required to smoothly fold heavy corrugated cardboard flaps on high-speed packaging lines without stalling.
Uses the 105 mm stroke to actuate routing gates on a conveyor system, relying on the adjustable end cushions to absorb the kinetic energy of rapid cycling.
Secures aluminum castings inside a machining center, utilizing the built-in S magnet to trigger DMSE electronic sensors that confirm the clamp is fully extended before the spindle starts.
When sizing this 50 mm bore unit, consider stepping down to the 40 mm bore if your load requires less than 628 N of push force at 0.5 MPa, or moving up to the 63 mm bore if you need the 1559 N thrust capacity. Because this is a standard double-acting cylinder, it will not hold a load statically if air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, explore the BSE series with a pneumatic rod lock. As an ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any standard ISO 15552 cylinder using the same 50 mm bore, 105 mm stroke, PT1/4 port, and mounting accessories.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X105S generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It features a PT1/4 port and a 20 mm diameter piston rod with an M16x1.5 thread.
Yes, the SE50X105S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 cylinders using the same mounting hardware, while the built-in magnet enables direct compatibility with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.