
The AirTAC SE50 Standard Cylinder SE50X10S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 10mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X10S is a double-acting single-rod ISO 15552 profile cylinder engineered for compact, high-force pneumatics. Delivering 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, it easily manages demanding short-stroke clamping tasks. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant exterior that simplifies mounting and maximizes spatial efficiency in tight machine cells.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensing for precise end-of-stroke verification. The integrated field-adjustable air cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, mitigating mechanical shock during rapid 10 mm strokes.
| Model | Airtac SE50 Standard Cylinder SE50X10S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a 10 mm stroke to precisely fold corrugated carton flaps, utilizing the 982 N push force at 0.5 MPa to crease heavy board stock cleanly.
Secures aluminum castings inside V-blocks during CNC milling, relying on the DMSE electronic sensor to confirm the 10 mm clamping position before coolant flow.
Executes rapid 10 mm ejection strokes for plastic parts, using the adjustable end cushion to decelerate the plunger and prevent marking on warm components.
For operations requiring less force, the 40 mm bore neighbor provides 628 N of push at 0.5 MPa, whereas stepping up to the 63 mm bore yields 1559 N for heavier loads. Because the SE50X10S is dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 cylinders, streamlining retrofits without altering mounting hardware or the PT1/4 port. Note that a plain SE cylinder will drift if air pressure is lost; applications requiring absolute load holding without live pressure must integrate an external pilot-operated check valve or transition to a BSE rod-lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X10S generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates safely within a 0.15-1.0 MPa pressure range.
Yes, the SE50X10S is dimensionally interchangeable per ISO 15552 and VDMA 24562 standards. It shares the standardized mounting interface and PT1/4 port, allowing a direct replacement for equivalent ISO 15552 cylinders without custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.