verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X1100S

The AirTAC SE50 Standard Cylinder SE50X1100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke1100 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$208.67 $216.17Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X1100S

The AirTAC SE50X1100S is a double-acting, single-rod ISO 15552 profile cylinder engineered for long-reach linear motion. It delivers a robust 982 N push force at 0.5 MPa (1374 N at 0.7 MPa) across its 1100 mm stroke. Because this stroke exceeds the standard 1000 mm catalog length for a 50 mm bore, it is supplied as a made-to-order assembly to precisely match your equipment's travel requirements.

This unit features a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors, enabling precise end-of-stroke detection. The square extruded aluminum barrel omits external tie rods entirely, yielding a compact, flush-mounting body that resists corrosion and simplifies bracket installation. Field-adjustable pneumatic cushioning at both ends allows you to tune the end-of-stroke deceleration, protecting the piston assembly from impact damage during high-speed traverses.

Airtac SE50 Standard Cylinder SE50X1100S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X1100S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke1100 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X1100S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×1100Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X1100S Is Used

conveyor_belt

Pallet Transfer Pusher

Drives large format pallets along a 1100 mm routing lane, utilizing the 982 N push force at 0.5 MPa to overcome friction and index heavy goods reliably between packaging stations.

warehouse

Automated Storage Retriever

Extracts deep-load totes from high-density vertical lift modules, relying on the -S magnet and DMSE electronic sensors to confirm full extension at the end of the long 1100 mm travel.

package_2

Film Roll Web Feeder

Shifts heavy converting rolls horizontally into a splicing cradle, where the adjustable end cushions absorb the kinetic energy of the massive 50 mm bore piston assembly at high traverse speeds.

Is the Airtac SE50 Standard Cylinder SE50X1100S the Right Cylinder?

Selecting the SE50X1100S is appropriate when your machine requires a 982 N push at 0.5 MPa over a highly extended 1100 mm travel. If you need slightly less force, stepping down to the 40 mm bore drops the 0.5 MPa push to 628 N but offers a lighter moving mass. Conversely, if your load demands more authority, stepping up to the 63 mm bore increases the 0.5 MPa push to 1559 N. Because this cylinder is dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 cylinders, matching the 50 mm bore, 1100 mm stroke, PT1/4 port, and standard mounting accessories without machining changes.

With a 1100 mm stroke, the 20 mm rod and internal bearing face significant bending moments under any side load; an external guide rail is strongly recommended to prevent premature seal wear. Furthermore, a plain SE cylinder does not hold its position or load when air pressure is lost or the valve is centered—the piston will drift. If your application must hold a load safely without live pressure, consider the AirTAC BSE rod lock variant or an external pilot-operated check valve.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X1100S FAQ

The 50 mm bore generates a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N. The maximum rated push force is 200 kgf when operated at the 1.0 MPa pressure limit.

No, the standard SE cylinder does not hold its position when air is lost or exhausted, as the piston will drift. The adjustable air cushion at both ends only decelerates the piston near the stroke end and does not function as a locking brake. For positive load holding, you must use an AirTAC BSE rod lock cylinder or an external mechanical rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X1100S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X1100S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.