
The AirTAC SE50 Standard Cylinder SE50X110FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 110mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X110FTC is a double-acting single-rod profile cylinder operating on the ISO 15552 interface. It delivers a robust 982 N push force at 0.5 MPa alongside an 825 N pull force, driven through a PT1/4 port and a 20 mm hard-chrome rod. This specific SKU is configured with an FTC trunnion mount and ships without a position-sensing magnet.
The extruded aluminum body omits external tie rods entirely, yielding a compact, corrosion-resistant housing that mounts flush against machine frames. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at high speeds.
| Model | Airtac SE50 Standard Cylinder SE50X110FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 982 N of clamping thrust at 0.5 MPa to secure aluminum engine blocks during CNC machining, utilizing the FTC pivot to accommodate slight part tolerances.
Drives a 110 mm stroke folding arm on a corrugated box packaging line, relying on the adjustable end cushions to prevent jarring impacts at high cycle rates.
Actuates a routing gate on a logistics conveyor, where the tie-rod-free extruded profile mounts cleanly to the conveyor frame without snagging passing parcels.
This 50 mm bore generates 982 N of push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N; if you need more thrust, the 63 mm bore provides 1559 N. Because this SKU lacks the -S magnet, it cannot host CMSE or DMSE position switches without modifying the piston assembly.
The FTC trunnion mount provides a fixed pivot point at the cylinder body, making it ideal for articulated mechanisms. Keep in mind that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If your mechanism must hold a vertical load without live air pressure, you must integrate an external rod lock like the BSE series or a pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The air supply connects via a PT1/4 port.
Yes, the SE50X110FTC is dimensionally interchangeable per ISO 15552, allowing it to drop into existing footprints and share standardized mounting hardware. Note that this specific configuration uses an FTC trunnion mount and lacks a position-sensing magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.