
The AirTAC SE50 Standard Cylinder SE50X115 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 115mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X115 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush into tight machinery spaces. The 115 mm stroke operates at speeds up to 800 mm/s, driven through a PT1/4 port.
This unit features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on a fixed rubber bumper. Because this SKU lacks the -S magnet code, it is not wired for AirTAC CMSE or DMSE position sensing out of the box. The 20 mm hard-chrome rod and M16x1.5 thread provide a robust interface for standard industrial loads.
| Model | Airtac SE50 Standard Cylinder SE50X115 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force required to fold and seal corrugated carton blanks on high-speed packaging lines, utilizing the 115 mm stroke for rapid jaw cycling.
Actuates a routing gate on a conveyor belt system, where the extruded profile barrel mounts flush to the frame and the adjustable cushion softens the diverting impact at 800 mm/s.
Drives a sliding safety door on a CNC lathe, where the 825 N retract force securely pulls the guard closed and the ISO 15552 footprint ensures easy maintenance replacement.
Weighing 982 N push at 0.5 MPa, this 50 mm bore sits right in the mid-range. If your assembly needs less force, stepping down to the 40 mm bore yields 628 N push, while moving up to the 63 mm bore provides 1559 N push for heavier fixtures. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, meaning you can retrofit it using standard mounting accessories without altering your existing fixture footprint.
Keep in mind that a plain SE cylinder does not hold its position or load when air is exhausted or the valve is centered; the piston will drift. If your process requires dead-stop holding without live pressure, you must integrate an external pilot-operated check valve or step up to the AirTAC BSE rod-lock variant. At 115 mm stroke, side-load stress on the rod bearing is minimal, but any unsupported overhung load should still use an external guide.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X115 generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N. The maximum rated push force is 200 kgf when operated at the 1.0 MPa pressure limit.
No. The adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a mechanical lock. If air is lost or the valve is centered, the piston will drift. For vertical load holding without live pressure, use an AirTAC BSE cylinder with a rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.