
The AirTAC SE50 Standard Cylinder SE50X115S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 115mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X115S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 dimensions for universal hardware interchangeability.
Equipped with a built-in magnet (-S), this unit supports direct mounting of AirTAC CMSE reed and DMSE electronic sensors along the three integrated sensor grooves. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X115S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push at 0.5 MPa required to smoothly fold and seal heavy cardboard flaps on high-speed packaging lines, utilizing the 115mm stroke for rapid, precise motion.
Leverages the built-in magnet and DMSE sensors to confirm gate position, reliably routing heavy wooden pallets along a 50mm bore transfer conveyor without external tie-rod obstructions.
Applies 825 N of pull force at 0.5 MPa to secure aluminum castings inside a CNC machining center, using adjustable end cushions to prevent shock when releasing the clamp.
Generating 982 N of push at 0.5 MPa, this 50mm bore fits squarely between the 40mm bore (628 N push) and the 63mm bore (1559 N push). If your payload requires less force, stepping down to the 40mm saves space, while moving up to the 63mm provides a substantial power reserve. The 115mm stroke and PT1/4 porting make it a direct replacement for any ISO 15552 cylinder footprint.
Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. For applications requiring position holding without live pressure, consider the BSE series rod lock. Additionally, while the 20mm rod handles normal loads well, any stroke over 300mm demands an external guide to prevent rod-bearing bending under side loads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50mm bore cylinder generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa operating pressure.
Yes, the SE50X115S is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using the same 50mm bore, 115mm stroke, and PT1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.