
The AirTAC SE50 Standard Cylinder SE50X1185S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1185mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X1185S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 1185 mm made-to-order stroke. It delivers 982 N of push force at 0.5 MPa, utilizing a 50 mm bore and a PT1/4 port. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies fixture integration.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s operations.
| Model | Airtac SE50 Standard Cylinder SE50X1185S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 1185 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×1185 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1185 mm stroke to push heavy pallets cleanly between adjacent roller conveyors, relying on the 982 N push force to overcome sliding friction.
Extends fully to fold large packaging flaps on automated carton erectors, tuned via the adjustable air cushions to prevent tearing the cardboard at high speeds.
Deploys the long stroke to eject totes from deep ASRS shelving, using the -S magnet and DMSE sensors to confirm full extension before the crane retracts.
Selecting this 50 mm bore makes sense when an application requires 982 N push at 0.5 MPa. If you need less force, stepping down to the 40 mm bore yields 628 N push, while stepping up to the 63 mm bore provides 1559 N push. Because this 1185 mm stroke exceeds the 1000 mm standard maximum for this bore, it is supplied as a non-standard, made-to-order configuration.
With an unsupported stroke of this length, the 20 mm rod and M16x1.5 thread face significant bending moments; an external guide rail is strongly recommended to prevent side-load damage to the rod bearing. This cylinder is dimensionally interchangeable with other ISO 15552 cylinders, serving as a direct replacement that preserves existing mounting hardware. Note that a plain SE cylinder will drift if air pressure is lost; use a BSE rod lock for critical load-holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE50X1185S shares the exact ISO 15552 / VDMA 24562 mounting interface dimensions, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using your existing FA, LB, or TC mounting brackets and PT1/4 ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.