
The AirTAC SE50 Standard Cylinder SE50X1200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X1200 is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a 982 N push at 0.5 MPa over a 1200 mm stroke. Its square extruded aluminum barrel omits external tie rods, yielding a compact body that mounts flush and resists corrosion in tight machinery spaces.
This unit lacks a built-in position-sensing magnet, operating purely as a pneumatic actuator via its PT1/4 ports. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X1200 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Extends 1200 mm to push heavy parcels off a high-speed sorting belt, utilizing the 982 N push force to reliably overcome carton friction.
Raises large fabric rolls into processing cradles, where the long stroke accommodates varying material diameters without retooling.
Transitions packaged goods across a wide conveyor gap into a palletizing cell, relying on adjustable end cushions to stop 800 mm/s travel smoothly.
This 50 mm bore generates 982 N push at 0.5 MPa; if your payload is lighter, the 40 mm bore provides 628 N, while stepping up to the 63 mm bore yields 1559 N for heavier loads. Because this SKU lacks the -S magnet, adding position feedback requires external limit switches rather than direct CMSE or DMSE sensors.
At 1200 mm of travel, the 20 mm rod and its bearing face significant bending moments under any side load, making an external linear guide essential to prevent premature seal wear. For direct retrofits, this cylinder shares standardized ISO 15552 mounting and PT1/4 porting with equivalent profile cylinders.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides a 982 N push and an 825 N pull. At 0.7 MPa, the push force is 1374 N. The maximum push capacity is 200 kgf when operated at the 1.0 MPa pressure limit.
No, the SE50X1200 is a standard double-acting cylinder and will drift if air is lost. The adjustable air cushion only decelerates the piston near the stroke ends and does not function as a braking or locking mechanism. For load holding, consider the BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.