verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X1200S

The AirTAC SE50 Standard Cylinder SE50X1200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke1200 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$224.95 $232.45Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X1200S

The AirTAC SE50X1200S is a double-acting single-rod ISO 15552 profile cylinder engineered for long-stroke linear motion. It delivers 982 N of push force and 825 N of pull force at 0.5 MPa, peaking at 1374 N push at 0.7 MPa. The square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

Equipped with a built-in magnet (-S), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection along its 1200 mm travel. Field-adjustable pneumatic cushioning at both ends allows you to tune end-stop deceleration, protecting the mechanics during high-velocity traversals.

Airtac SE50 Standard Cylinder SE50X1200S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X1200S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke1200 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X1200S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×1200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X1200S Is Used

conveyor_belt

Pallet Transfer Conveyors

Drives heavy pallets along 1200 mm tracks, utilizing the 982 N push force to overcome friction and the built-in magnet for precise home-position signaling.

package_2

Large Format Packaging

Actuates folding carton erecting arms over extended travels, relying on field-adjustable end cushions to soften impacts at 800 mm/s operating speeds.

science

Lab Sample Distribution

Moves automated sample racks between testing stations, benefiting from the flush extruded profile to minimize contamination traps in cleanroom environments.

Is the Airtac SE50 Standard Cylinder SE50X1200S the Right Cylinder?

For lower force needs, stepping down to a 40 mm bore yields 628 N push at 0.5 MPa, while moving up to a 63 mm bore provides 1559 N push. Because this 1200 mm stroke creates a long unsupported rod span, adding an external guide rail is critical to prevent rod-bearing bending under side loads. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware, a PT1/4 port, and a 20 mm rod. Note that the adjustable air cushion only decelerates the piston near stroke end; it cannot hold a load if air pressure is lost.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X1200S FAQ

At 0.5 MPa it provides 982 N push and 825 N pull; at 0.7 MPa it provides 1374 N push. The maximum push is 200 kgf at 1.0 MPa, with an operating speed range of 30-800 mm/s.

No, the SE50X1200S is a standard double-acting cylinder and the adjustable air cushion only decelerates the piston near the end of its stroke. To hold a load without live air pressure, you need a BSE series rod lock or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X1200S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X1200S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.