
The AirTAC SE50 Standard Cylinder SE50X120S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 120mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X120S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. It uses a 50 mm bore and a 120 mm stroke, driven through a PT1/4 port, to power mid-range automation tasks.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing sensor grooves on three sides. The integrated -S magnet enables direct fitment of AirTAC CMSE reed and DMSE electronic switches for precise end-of-stroke detection.
| Model | Airtac SE50 Standard Cylinder SE50X120S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates lane guiding arms on packaging conveyors, using the 982 N push force to swiftly redirect heavy cardboard cartons at high throughput.
Pushes raw steel bar stock into collet chucks, relying on the 120 mm stroke and built-in DMSE sensor magnet to confirm material staging.
Drives secondary ejection arms to clear molded plastic parts from press tools, utilizing the field-adjustable air cushion to soften hard end stops.
Choose this 50 mm bore when a 40 mm cylinder (628 N push @0.5 MPa) lacks thrust for heavier indexing, but an 80 mm unit (2513 N push @0.5 MPa) is physically oversized. Because this is a double-acting cylinder, it cannot hold a load if air pressure drops or the valve centers; use a BSE rod lock for fail-safe positioning.
As a true ISO 15552 profile cylinder, it drops directly into existing footprints sharing standard LB, FA, and TC mounting hardware. The 120 mm stroke falls under the 300 mm threshold, so standard rod-bearing bending is minimal, though long unsupported loads still require external guiding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, it provides 982 N push and 825 N pull. At 0.7 MPa, push increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE50X120S is dimensionally interchangeable per ISO 15552 standards, meaning it shares identical mounting interface dimensions and can serve as a direct replacement for other ISO 15552 profile cylinders without altering your existing hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.