
The AirTAC SE50 Standard Cylinder SE50X125FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 125mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X125FTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for 982 N of push force and 825 N of pull force at 0.5 MPa. Built with an extruded aluminum barrel that eliminates external tie rods, this unit resists corrosion and allows for flush mounting in tight machine envelopes. The integrated FTC mounting accessory provides a rigid front trunnion connection for demanding pivoting applications.
This 50 mm bore, 125 mm stroke model features a PT1/4 port and a 20 mm hard-chrome plated rod. The field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in impact deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s cycling. Note that this specific SKU is supplied without a piston magnet, so it will not trigger CMSE or DMSE electronic position sensors without modification.
| Model | Airtac SE50 Standard Cylinder SE50X125FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the pivoting forming arms on case erectors, using the 982 N push force and FTC trunnion mount to reliably fold heavy corrugated board at high cyclic rates.
Actuates routing gates on parcel sorting lines, where the 125 mm stroke provides enough travel to redirect packages while the adjustable cushion softens the shift impacts.
Pushes finished aluminum parts out of CNC machining centers, utilizing the 825 N retract force to withdraw the rod quickly and clear the work area for the next cycle.
Choosing this 50 mm bore is ideal when you need roughly 982 N of push at 0.5 MPa. If your load requires less force, you can step down to the 40 mm bore offering 628 N of push, or if you need substantially more power, step up to the 63 mm bore delivering 1559 N of push at 0.5 MPa. Because the 125 mm stroke is under 300 mm, side-load stress on the rod bearing is moderate, but an external guide is still recommended for heavy offset loads.
As a true ISO 15552 cylinder, it serves as a direct dimensional replacement for other ISO 15552 profile cylinders, sharing standard mounting footprint dimensions. Remember that the adjustable air cushion only decelerates the piston near the end of travel; it is not a locking device. If your application must hold a vertical load without live air pressure, pair this cylinder with an external pilot-operated check valve or transition to the AirTAC BSE rod-lock series.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates on filtered air between 0.15-1.0 MPa, with a speed range of 30-800 mm/s.
This specific SKU does not include a built-in magnet, so it cannot trigger AirTAC CMSE reed or DMSE electronic sensors without modification. Dimensionally, it is an ISO 15552 profile cylinder, meaning it serves as a direct replacement for any standard ISO 15552 cylinder using identical mounting interface dimensions, without claiming exact brand equivalence.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.