
The AirTAC SE50 Standard Cylinder SE50X125S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 125mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X125S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 982 N at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush and resists corrosion in tight machinery layouts.
Equipped with a built-in magnet (S option), this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable air cushioning at both ends allows technicians to tune deceleration via a set screw, softening hard end stops during high-speed 30-800 mm/s cycles.
| Model | Airtac SE50 Standard Cylinder SE50X125S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Deploys 982 N of push force at 0.5 MPa to fold heavy cardboard flaps on continuous packaging lines, relying on the 125 mm stroke to clear the web during retraction.
Actuates a routing gate for PET bottles, using the integrated magnet and DMSE electronic sensor to confirm gate position before high-speed filling machinery indexes.
Pushes metal blanks into a stamping press bed, utilizing the tie-rod-free extruded profile to sit flush against the machine frame without protruding hardware.
This 50 mm bore generates 982 N push at 0.5 MPa. If your payload is lighter, stepping down to the 40 mm bore drops output to 628 N, while moving up to the 63 mm bore increases thrust to 1559 N. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 50 mm bore, 125 mm stroke assembly using PT1/4 ports and standard mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the rod, so external pilot checks are needed to hold vertical loads without live pressure.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the 50 mm bore provides 982 N push and 825 N pull. At 0.7 MPa, push increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes. The SE50X125S is dimensionally interchangeable per ISO 15552, sharing standard mounting footprints and a PT1/4 port. You can drop it directly into existing tooling using standard FA or LB brackets without redesigning the plate.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.