verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X130

The AirTAC SE50 Standard Cylinder SE50X130 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 130mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke130 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$76.06 $83.56Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X130

The AirTAC SE50X130 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Featuring a 50 mm bore and a 130 mm stroke, this unit operates efficiently between 30-800 mm/s. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while freeing up perimeter space for valves and manifolds.

Deceleration at stroke ends is managed by field-adjustable pneumatic cushioning at both the head and cap, allowing technicians to tune exhaust bleed-off to soften hard end stops at high cycle speeds. This specific SKU lacks the built-in magnet option, so it does not support CMSE or DMSE position sensing without external retrofits. The M16x1.5 rod-end thread and PT1/4 port provide standardized connection points for seamless ISO 15552 integration.

Airtac SE50 Standard Cylinder SE50X130 Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X130
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke130 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X130

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×130Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X130 Is Used

precision_manufacturing

CNC Lathe Door Actuation

Drives the sliding safety door of a CNC lathe, utilizing the 982 N push force to overcome guide resistance and the adjustable cushion to ensure a soft, non-jarring close at the end of the 130 mm travel.

package_2

Carton Flap Folding

Deploys a folding arm on a continuous packaging line, using the 825 N retract force to tuck corrugated cardboard flaps at high speeds without crushing the box structure.

conveyor_belt

Pallet Diverter Gate

Pivots a mechanical diverter arm on a conveyor to route pallets, relying on the extruded aluminum profile's flush mounting capability to fit within tight transfer zone clearances.

Is the Airtac SE50 Standard Cylinder SE50X130 the Right Cylinder?

When sizing this 50 mm bore actuator, evaluate your dynamic load against its 982 N push capacity at 0.5 MPa. If your application demands less force, the adjacent 40 mm bore provides 628 N of push, whereas stepping up to the 63 mm bore yields 1559 N for heavier payloads. Because this is a standard double-acting cylinder, it cannot hold a load mid-stroke or upon air loss; the piston will drift if pressure is exhausted or the directional valve centers. For position-holding requirements, consider pairing this cylinder with an external pilot-operated check valve or exploring the BSE rod-lock series.

Dimensionally interchangeable per ISO 15552, this profile cylinder serves as a direct replacement for other ISO 15552 cylinders, sharing identical mounting footprint and accessory hardware. For this 130 mm stroke, the 20 mm rod diameter handles standard axial loads well, though any long unsupported stroke exceeding 300 mm would require an external guide to prevent rod-bearing bending. Confirm the PT1/4 port and basic mounting configuration match your existing manifold and bracketry before finalizing your RFQ.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X130 FAQ

The SE50X130 generates 982 N of push force and 825 N of pull force at 0.5 MPa, increasing to 1374 N push at 0.7 MPa, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s within a 0.15-1.0 MPa pressure range.

No, a standard double-acting SE cylinder relies on live air pressure and will drift if air is lost or the valve is centered. The adjustable air cushion only decelerates the piston near the stroke ends; it does not lock the rod. For fail-safe load holding, use an external rod lock or the AirTAC BSE series.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X130

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X130 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.