
The AirTAC SE50 Standard Cylinder SE50X1300S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1300mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X1300S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 1300 mm stroke, operating at a 982 N push force at 0.5 MPa. Because this 1300 mm length exceeds the standard 1200 mm maximum for a 50 mm bore, it is manufactured as a made-to-order unit to precisely fit your extended-reach machinery. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies bracket installation.
Equipped with a built-in magnet (-S), this model directly supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke verification. It features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a set screw to soften hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X1300S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push force and 1300 mm stroke to index heavy loaded pallets smoothly between robotic welding stations on an assembly line.
Actuates a 1.3-meter lifting barrier in automated storage systems, relying on the -S magnet and DMSE sensors to confirm gate position.
Deploys the extended stroke to open and square oversized corrugated cartons, using the adjustable cushion to prevent tearing at high speeds.
Delivering 982 N of push at 0.5 MPa, this 50 mm bore is a strong mid-range choice. If your application requires less force, the 40 mm neighbor provides 628 N; if you need substantially more power, stepping up to the 63 mm bore yields 1559 N. For this specific 1300 mm made-to-order stroke, the 20 mm piston rod and M16x1.5 thread carry a solid load, but an unsupported 1.3-meter span invites rod-bearing bending under side load—always pair an extended stroke like this with an external guide rail to prevent premature seal wear.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 50 mm bore, 1300 mm stroke unit with a PT1/4 port and your chosen mounting accessory. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism. If the machine loses air pressure, the cylinder will drift, so add a BSE rod lock or external pilot-operated check valve if the load must be held in place.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, the SE50X1300S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders with a 50 mm bore, matching PT1/4 ports, and standard mounting accessories, without altering the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.