
The AirTAC SE50 Standard Cylinder SE50X130S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 130mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X130S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a push force of 982 N and a pull force of 825 N at 0.5 MPa. Driven by filtered air over a 0.15-1.0 MPa operating range, it provides a standard 130 mm stroke with a PT1/4 port and a 20 mm hard-chrome rod.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The integrated -S magnet directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection, while field-adjustable air cushions at both ends allow you to tune deceleration and soften hard end stops.
| Model | Airtac SE50 Standard Cylinder SE50X130S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push and 130 mm stroke needed to fold and seal corrugated cardboard flaps on high-speed packaging lines, using the -S magnet to trigger the glue sequence.
Swings a diverter gate at a conveyor transfer point, relying on the 825 N pull force to retract the arm cleanly within the 30 mm cushion length before the next pallet arrives.
Secures aluminum engine blocks during machining, taking advantage of the flush extruded barrel profile and ISO 15552 dimensions to mount closely alongside spindle tooling.
With a 982 N push at 0.5 MPa, this 50 mm bore sits comfortably between the 40 mm bore (628 N push) and the 63 mm bore (1559 N push), letting you step down for lighter duty or up for heavier loads. The ISO 15552 mounting interface ensures dimensional interchangeability with other standard profile cylinders, sharing mounting hardware like FA front flanges or LB foot brackets. Because the 130 mm stroke is under 300 mm, side-load stress on the rod bearing is minimal, though an external guide remains best practice for heavy radial loads. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism, so a BSE rod lock is required if the load must be held without live air pressure.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X130S generates 982 N of push force and 825 N of pull force. At 0.7 MPa, push increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X130S is dimensionally interchangeable per ISO 15552 standards. You can swap it directly into existing foot or flange mounting hardware. The built-in -S magnet also works seamlessly with AirTAC CMSE and DMSE position sensors for direct automation feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.