
The AirTAC SE50 Standard Cylinder SE50X135 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 135mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X135 is a double-acting, single-rod ISO 15552 profile cylinder delivering 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Its square extruded aluminum barrel completely omits external tie rods, yielding a highly compact, corrosion-resistant body that mounts flush against machine frames while leaving the integrated sensor grooves fully accessible on three sides.
This 50 mm bore unit features a 20 mm piston rod, an M16x1.5 rod-end thread, and a PT1/4 port. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling. Because this specific SKU lacks the built-in -S magnet, it is not wired for CMSE or DMSE electronic position sensing out of the box.
| Model | Airtac SE50 Standard Cylinder SE50X135 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push at 0.5 MPa and 135 mm travel needed to consistently fold and square corrugated cardboard flaps on high-speed packaging lines.
Actuates a routing gate to sort medium-weight pallets, utilizing the adjustable end cushions to absorb the kinetic energy of the 30-800 mm/s stroke.
Extends a parts-collection chute at a 135 mm distance, relying on the compact tie-rod-free aluminum profile to fit within the tight clearances of a machine enclosure.
Selecting this 135 mm stroke model is ideal when a machine requires a mid-range extension paired with roughly 100 kgf of maximum thrust. If your assembly needs less force, stepping down to the 40 mm bore yields 628 N push at 0.5 MPa; conversely, scaling up to the 63 mm bore provides 1559 N push at 0.5 MPa for heavier payloads. Because 135 mm is a standard stroke, it serves as a direct, dimensionally interchangeable direct replacement for other ISO 15552 cylinders without altering existing mounting hardware or centerline distances.
Keep in mind that a standard SE cylinder relies on live air pressure to maintain its position; if air is exhausted or a valve is centered, the piston will drift and cannot hold a load. For applications requiring true position holding without continuous air, consider the BSE rod-lock variant. Furthermore, while the 20 mm rod provides solid structural support, any stroke over 300 mm necessitates an external guide to prevent rod-bearing bending under severe side loads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X135 has a 50 mm bore and a PT1/4 port. At 0.5 MPa it provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum drive force is 200 kgf at 1.0 MPa.
Yes, as an ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. You can swap it into existing setups using the same mounting accessories and centerline dimensions, though this specific SKU lacks a sensor magnet for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.