
The AirTAC SE50 Standard Cylinder SE50X1350S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1350mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X1350S is a double-acting single-rod profile cylinder built to ISO 15552 / VDMA 24562 standards. It features a 50mm bore and a 1350mm stroke, yielding a theoretical push force of 982 N at 0.5 MPa (1374 N at 0.7 MPa) and a maximum of 200 kgf at 1.0 MPa. The extruded aluminum barrel lacks external tie rods, presenting a clean, flush surface that resists corrosion and simplifies bracket mounting in tight machinery layouts.
This unit includes a built-in magnet (-S) for non-contact position sensing using AirTAC CMSE (reed) and DMSE (electronic) switches. Because the 1350mm stroke exceeds the standard 1200mm maximum for this bore, it is manufactured as a made-to-order item. It retains the standard PT1/4 port and M16x1.5 rod thread, while field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration for heavy moving loads.
| Model | Airtac SE50 Standard Cylinder SE50X1350S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives an extended vertical pick-and-place arm in end-of-line palletizing, utilizing the 1350mm stroke to reach deep stacking heights while providing 982 N of push force to lower loads smoothly.
Shifts a diverter gate across a wide-belt conveyor system, where the long stroke ensures full lane separation and the ISO 15552 mounting interface allows rigid body attachment to the conveyor frame.
Regulates the tension roller on a wide-web coating machine, using the 50mm bore's 825 N pull force to maintain precise web tension across the extended 1350mm travel distance.
With a 982 N push at 0.5 MPa, this 50mm bore sits between the 40mm (628 N) and 63mm (1559 N) options; step up to the 63mm if your load requires substantially more thrust, or down to the 40mm for lighter duties. As a standard double-acting cylinder, it does not hold position or support a load if air pressure is lost or the valve is centered—use a BSE rod lock variant or external guide for fail-safe holding. At 1350mm, the unsupported piston rod is highly susceptible to bending under side loads; an external linear guide is strongly recommended to prevent rod-bearing damage. For ISO 15552 direct retrofits, match the 50mm bore, 1350mm stroke, PT1/4 port, and -S magnet specification.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X1350S generates a push force of 982 N at 0.5 MPa and 1374 N at 0.7 MPa. The retract (pull) force is 825 N at 0.5 MPa, and the maximum push force is 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, it is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing standardized mounting interfaces and a PT1/4 port. However, the 1350mm stroke exceeds the standard 1200mm maximum for a 50mm bore, making it a non-standard, made-to-order configuration that requires an external guide to prevent side-load bending.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.