
The AirTAC SE50 Standard Cylinder SE50X135S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 135mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X135S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing three integrated sensor grooves for flexible switch placement.
Because this specific unit includes the -S magnet code, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. The field-adjustable pneumatic cushioning at both stroke ends allows technicians to dial in deceleration via a setscrew, softening hard mechanical impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X135S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical flap-folding arms on continuous-motion packaging lines, utilizing the 982 N push force to securely square corrugated board prior to sealing.
Actuates a routing diverter arm on modular transport conveyors, relying on the 135mm stroke to shift product lanes smoothly at high cycling speeds.
Indexes the intermediate tool-loading arm in automated machining centers, where the built-in DMSE electronic sensor confirms exact magazine handoff positioning.
Generating 982 N of thrust at 0.5 MPa, this 50mm bore sits perfectly between the 40mm option (628 N) for lighter duties and the 63mm option (1559 N) when heavier payloads are required. The 135mm stroke provides ample extension for mid-range positioning tasks.
As a standard ISO 15552 cylinder, it serves as a dimensionally interchangeable direct replacement for other profile cylinders in retrofit projects. Remember that the adjustable air cushion only decelerates the piston near the end of travel; it is not a locking mechanism. If your application requires the load to hold its position without continuous air pressure, you must pair this cylinder with an external pilot-operated check valve or step up to an AirTAC BSE rod-lock variant. Furthermore, while the 20mm rod handles moderate side loading, any stroke exceeding 300mm demands an external guide to prevent rod-bearing bending.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50mm bore cylinder provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push force of 200 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes. The SE50X135S is a true ISO 15552 profile cylinder, meaning its mounting and physical envelope dimensions are standardized. You can drop it directly into existing ISO 15552 tooling without altering the mounting footprint, provided you maintain the PT1/4 port and standard mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.