
The AirTAC SE50 Standard Cylinder SE50X140S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 140mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X140S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, offering a flush mounting surface that resists corrosion and simplifies bracket installation in tight machinery layouts.
Equipped with a built-in magnet (S option), this 50 mm bore unit directly supports AirTAC CMSE reed and DMSE electronic position sensors along the three integrated side grooves. The field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration, protecting payloads during the 140 mm travel.
| Model | Airtac SE50 Standard Cylinder SE50X140S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force required to fold and secure heavy cardboard flaps on continuous-motion packaging lines, using the 140 mm stroke to clear the product path during retraction.
Actuates a routing gate to push parcels between conveyor belts, where the built-in magnet triggers DMSE sensors to confirm the diverter is fully retracted before items pass.
Positions sheet metal backstops on a bending press, relying on the adjustable end cushions to prevent hard mechanical shocks from degrading repeatability over the 140 mm travel.
When sizing this actuator, compare its 982 N push at 0.5 MPa against the smaller 40 mm bore (628 N push) for lighter loads, or step up to the 63 mm bore (1559 N push) if your application demands greater thrust. Because the SE50X140S is dimensionally interchangeable per ISO 15552, it serves as a direct replacement for competing standard profile cylinders without altering mounting footprints.
To specify a replacement accurately, match the 50 mm bore, 140 mm stroke, PT1/4 port, and your required mounting accessory. Note that while the adjustable air cushion softens end stops, it does not lock the piston; if air pressure drops, the rod drifts, requiring a BSE rod lock for fail-safe load holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X140S generates 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum operating pressure is 1.0 MPa, where it achieves a maximum push of 200 kgf.
Yes, the SE50X140S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it directly into existing mounting hardware, provided you match the PT1/4 port and M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.