
The AirTAC SE50 Standard Cylinder SE50X15 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 15mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X15 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. It delivers 982 N of push force at 0.5 MPa alongside 825 N of pull force, making it well-suited for short-stroke clamping and ejection tasks. The extruded aluminum barrel omits external tie rods, yielding a smooth, corrosion-resistant exterior that mounts flush against machine frames.
This specific SKU lacks a built-in magnet, meaning it operates without position sensing out of the box. To tailor end-of-stroke impacts, the cylinder features field-adjustable air cushioning at both ends via a set screw, allowing you to fine-tune deceleration for fast 30-800 mm/s cycles rather than relying on a fixed rubber bumper.
| Model | Airtac SE50 Standard Cylinder SE50X15 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Delivers 982 N of push force to secure aluminum castings onto machining centers during high-speed milling operations.
Uses its rapid 15 mm stroke to kick folded corrugated cartons off a packaging conveyor at up to 800 mm/s.
Provides reliable 825 N retraction force to pull small stamping blanks out of progressive press dies without hanging up.
For applications requiring less force, the SE40 bore provides 628 N of push at 0.5 MPa, whereas stepping up to the SE63 bore yields 1559 N for heavier payloads. Since this SKU has no -S magnet, you will need to add one if your control system requires CMSE or DMSE position feedback. Keep in mind that this standard double-acting cylinder relies on live air pressure to hold its load; if air is lost, the piston drifts, so a BSE rod lock is necessary for fail-safe holding. At a 15 mm stroke, side-load stress on the M16x1.5 rod thread is negligible, but always ensure the load is axially aligned.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X15 generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum of 200 kgf at 1.0 MPa. It features a PT1/4 port and a 20 mm rod with an M16x1.5 thread.
Yes, it is built to the ISO 15552 / VDMA 24562 standard, meaning its mounting footprint and body dimensions allow it to serve as a direct replacement for other ISO 15552 profile cylinders without requiring structural machine modifications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.