
The AirTAC SE50 Standard Cylinder SE50X150N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X150N is a double-acting, single-rod ISO 15552 profile cylinder engineered for industrial pneumatics. Delivering 982 N of push force at 0.5 MPa, it is built with an NBR seal assembly optimized for standard operating temperatures.
Unlike traditional tie-rod bodies, its extruded aluminum barrel features a clean, flush exterior with integrated sensor grooves on three sides. The field-adjustable pneumatic cushioning at both stroke ends can be tuned via a setscrew to decelerate loads smoothly, preventing harsh end-cap impacts.
| Model | Airtac SE50 Standard Cylinder SE50X150N |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push stroke needed to form and fold corrugated cardboard flaps on high-speed packaging lines.
Actuates a routing flap with its 150 mm stroke to sort medium-weight parcels off a main conveyor belt.
Holds aluminum engine blocks in place during machining, utilizing its NBR seals for reliable daily cyclic operation.
For applications needing less force, the 40 mm bore provides 628 N push at 0.5 MPa; if your fixture requires more thrust, stepping up to the 63 mm bore yields 1559 N. Because this specific SKU lacks the -S magnet, it cannot support AirTAC CMSE or DMSE position sensors without modification. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your process loses air pressure, the rod will drift, requiring an external guide or a BSE rod lock for secure positioning.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X150N provides 982 N of push force and 825 N of pull force. At 0.7 MPa, push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE50X150N is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using the same 50 mm bore, 150 mm stroke, PT1/4 port, and mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.