verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X150STC

The AirTAC SE50 Standard Cylinder SE50X150STC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke150 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$144.92 $152.42Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X150STC

The AirTAC SE50X150STC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush and resists corrosion. The integrated TC centre trunnion allows pivoting movements, while the built-in -S magnet enables precise position detection using CMSE reed or DMSE electronic sensors.

Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling. Operating at speeds up to 800 mm/s, this 50 mm bore unit uses a PT1/4 port and a Ø20 mm rod with an M16x1.5 thread, making it dimensionally interchangeable with other ISO 15552 cylinders for seamless retrofits.

Airtac SE50 Standard Cylinder SE50X150STC Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X150STC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke150 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X150STC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X150STC Is Used

package_2

Carton Erector Flap Folding

Provides 982 N of push force at 0.5 MPa to cleanly fold heavy cardboard flaps on high-speed packaging lines, using its adjustable cushion to soften end-of-stroke impacts.

conveyor_belt

Bottling Line Diverter Gate

Utilizes the TC centre trunnion to pivot a routing gate across a conveyor, accurately guiding beverage containers with its 150 mm stroke and DMSE sensor feedback.

factory

Injection Mould Part Ejection

Cycles at up to 800 mm/s to eject plastic parts from moulding presses, leveraging the flush aluminum profile to mount tightly against machine platens.

Is the Airtac SE50 Standard Cylinder SE50X150STC the Right Cylinder?

Choosing this 50 mm bore depends on your force and space requirements; it generates 982 N push at 0.5 MPa. If your load demands less force, the 40 mm bore provides 628 N push, whereas stepping up to the 63 mm bore yields 1559 N push. This SE50X150STC variant includes a TC centre trunnion for pivot mounting and an -S magnet for CMSE or DMSE sensors. Keep in mind that a standard double-acting cylinder relies on continuous air pressure to hold a load; if air is lost, the piston will drift. For fail-safe holding, consider a BSE rod lock variant. Because the stroke is 150 mm, side loads are manageable, but long unsupported strokes still require an external guide to prevent rod-bearing bending.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X150STC FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE50X150STC is dimensionally interchangeable with other ISO 15552 profile cylinders, sharing standard mounting interface dimensions. Because it includes a built-in magnet (-S), it works directly with AirTAC CMSE reed switches and DMSE electronic sensors for end-of-stroke detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X150STC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X150STC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.