
The AirTAC SE50 Standard Cylinder SE50X152S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 152mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X152S is a double-acting single-rod profile cylinder built to the ISO 15552 standard. It features a 50 mm bore and a 152 mm stroke, generating a substantial 982 N push force at 0.5 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion.
Because this unit includes the -S magnet code, it is fully primed for CMSE reed or DMSE electronic position sensing along the three integrated sensor grooves. The 152 mm stroke is a non-standard made-to-order length, allowing you to match precise machine kinematics without mechanical spacers. Field-adjustable air cushions at both ends let you dial in the end-of-stroke deceleration to absorb kinetic energy smoothly.
| Model | Airtac SE50 Standard Cylinder SE50X152S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 152 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×152 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push and 152 mm travel required to fold corrugated cardboard flaps on high-speed packaging lines without crushing the material.
Uses the built-in magnet with DMSE sensors to confirm stroke position rapidly, actuating a diverter gate to route parcels on a warehouse conveyor belt.
Cycles the safety interlock door on a CNC lathe, utilizing the adjustable pneumatic cushions to soften the impact at both ends of the 152 mm travel.
Selecting this 50 mm bore makes sense when you need 982 N of push force at 0.5 MPa. If your payload is lighter, stepping down to a 40 mm bore yields 628 N of push, whereas moving up to a 63 mm bore provides 1559 N for heavier loads. The PT1/4 port and M16x1.5 rod thread provide a robust interface for this mid-range thrust class.
Since the 152 mm stroke is a custom length, ensure your CAD models reflect the exact extended dimensions. As a standard double-acting cylinder, the SE50X152S will drift if air pressure is lost or the valve centers; it cannot hold a load mid-stroke without a pilot-operated check valve or a BSE rod lock variant. Being dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other ISO 15552 cylinders using existing mounting hardware.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes. The SE50X152S is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint and rod thread dimensions as other standard ISO 15552 profile cylinders. You can drop it into existing setups using your current FA, LB, or TC mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.