
The AirTAC SE50 Standard Cylinder SE50X154S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 154mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X154S is a double-acting, single-rod ISO 15552 profile cylinder engineered for mid-range actuation. It provides a robust 982 N push force at 0.5 MPa, paired with a 154 mm stroke that fits precisely between standard lengths. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific unit includes the built-in -S magnet for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors along the three dedicated sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X154S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 154 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×154 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Folds and tucks corrugated cardboard flaps with 982 N of push force, utilizing the 154 mm stroke to clear the packaging lane during retraction.
Actuates a routing flap on a modular conveyor belt, relying on the ISO 15552 profile barrel for flush mounting and the -S magnet for DMSE timing signals.
Ejects finished shafts from a CNC lathe spindle, using the adjustable cushion to gently decelerate the 154 mm stroke before the part hits the collection chute.
If 982 N of push at 0.5 MPa is too much for your fixture, step down to the 40 mm bore delivering 628 N. Conversely, heavier payloads require the 63 mm bore providing 1559 N. Because this is a double-acting cylinder, it relies on continuous live air pressure to move; if your circuit loses air or the valve centers, the piston will drift and cannot hold a load. For failsafe holding, consider the BSE rod-lock variant or an external pilot-operated check valve. At 154 mm, side loading is moderate, but always verify the rod-bearing load if guiding heavy offsets.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and operates at speeds between 30 and 800 mm/s.
Yes, the SE50X154S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it serves as a direct replacement for other ISO 15552 profile cylinders using the same 50 mm bore and 154 mm stroke, sharing standard mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.