
The AirTAC SE50 Standard Cylinder SE50X155S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 155mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X155S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes. The integrated -S magnet enables precise piston tracking via CMSE reed and DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both stroke ends allows technicians to fine-tune end-of-travel deceleration, softening hard impacts when cycling at speeds up to 800 mm/s. This 50 mm bore, 155 mm stroke configuration uses a PT1/4 port and a 20 mm hard-chrome rod, making it dimensionally interchangeable with other ISO 15552 cylinders for seamless retrofits.
| Model | Airtac SE50 Standard Cylinder SE50X155S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 982 N of push force at 0.5 MPa to secure aluminum engine blocks during CNC machining, utilizing the 155 mm stroke to clear the workzone.
Drives mechanical folding arms at up to 800 mm/s to tuck corrugated carton flaps prior to tape sealing, with adjustable cushions softening the stroke ends.
Actuates a routing gate on a packaging line conveyor, using the -S magnet and DMSE sensors to confirm gate position for high-speed product flow.
Selecting the SE50X155S is optimal when a 982 N thrust at 0.5 MPa meets your payload requirements. If your load demands less force, stepping down to the 40 mm bore yields 628 N push, whereas upgrading to the 63 mm bore provides 1559 N for heavier payloads. Because this is a double-acting cylinder, it does not hold position if air pressure drops; apply a BSE rod lock for fail-safe holding. The 155 mm stroke is below the 300 mm threshold, minimizing rod-bearing bending, but an external guide is still recommended for rigid lateral loads.
For direct ISO 15552 interchangeability, match the 50 mm bore, 155 mm stroke, PT1/4 port, and your specific mounting accessory. The included -S magnet ensures out-of-the-box compatibility with AirTAC CMSE and DMSE position switches.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X155S provides 982 N push and 825 N pull. At 0.7 MPa, push increases to 1374 N, with a maximum push of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X155S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using identical mounting hardware and a PT1/4 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.