
The AirTAC SE50 Standard Cylinder SE50X15S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 15mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X15S is a double-acting, single-rod ISO 15552 profile cylinder engineered for short-stroke automation. It provides a robust 982 N push force at 0.5 MPa alongside an 825 N pull force, making it ideal for compact clamping and indexing tasks.
This variant includes a built-in magnet (-S) for direct integration with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel eliminates external tie rods, yielding a clean, corrosion-resistant profile that mounts flush, while the field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration to protect tooling.
| Model | Airtac SE50 Standard Cylinder SE50X15S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Secures printed circuit board panels during routing operations, utilizing the 982 N push force and 15 mm stroke to lock parts firmly without over-traveling.
Actuates short-stroke folding blades on packaging lines, where the 825 N retract force rapidly retracts the mechanism to clear the passing cardboard.
Functions as a pneumatic stop in feed systems, extending the 20 mm rod to arrest sheet metal blanks accurately before press entry.
When sizing this actuator, note that stepping down to a 40 mm bore reduces the 0.5 MPa push to 628 N, while stepping up to a 63 mm bore increases it to 1559 N. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops or the valve is centered; a load-holding application requires a BSE rod lock variant or an external pilot-operated check valve. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware, a PT1/4 port, and the -S magnet option.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X15S delivers a push force of 982 N at 0.5 MPa and 1374 N at 0.7 MPa, with a pull force of 825 N at 0.5 MPa. The maximum operating pressure yields 200 kgf of push force. This specific unit has a 15 mm stroke, and the standard maximum stroke available for the 50 mm bore is 1200 mm.
Yes, it is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using the same mounting footprint. Additionally, this model includes a built-in magnet designed specifically for AirTAC CMSE reed and DMSE electronic position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.