
The AirTAC SE50 Standard Cylinder SE50X160SCA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 160mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X160SCA is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous pneumatic motion control. It provides a robust 982 N push force at 0.5 MPa and a 1374 N push at 0.7 MPa, making it highly capable for mid-range actuation tasks.
This unit features a square extruded aluminum barrel that eliminates external tie rods, offering a flush, corrosion-resistant exterior that simplifies mounting. Equipped with a built-in magnet, it seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection.
| Model | Airtac SE50 Standard Cylinder SE50X160SCA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the mechanical arms on a packaging line to open and fold corrugated board, utilizing the 982 N push force and 160 mm stroke to ensure crisp, repeatable folds.
Actuates a routing flap on a conveyor system to sort heavy pallets, relying on the CA clevis mount to accommodate the angular movement of the redirect arm.
Presses a dispensing head against substrates in a coating machine, using the integrated magnet with DMSE sensors to verify exact material application depth.
If your application requires less force, the 40 mm bore neighbor provides 628 N push at 0.5 MPa, while stepping up to the 63 mm bore yields 1559 N for heavier cycles. This SE50X160SCA variant includes a CA single clevis mount for pivoting articulation and a built-in magnet for CMSE or DMSE switches. For strokes of 160 mm or more, side-load stress on the rod bearing increases; always utilize an external guide to prevent bending and premature wear. Note that the adjustable air cushions at both ends decelerate the piston near the stroke limits but do not lock the load—use a BSE rod lock if static holding is required.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X160SCA generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It utilizes a PT1/4 port and a Ø20 mm rod with an M16x1.5 thread.
Yes, the SE50X160SCA is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. You can reuse existing mounting hardware and utilize the three sensor grooves on the extruded barrel for CMSE or DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.