
The AirTAC SE50 Standard Cylinder SE50X160SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 160mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X160SCB is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a built-in magnetic piston for non-contact position sensing using CMSE or DMSE switches, paired with a CB double clevis mounting accessory for pivoting articulation. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X160SCB |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a pivoting diverter arm on a packaging conveyor, utilizing the 160 mm stroke and CB clevis to smoothly route boxes with its 982 N push force.
Actuates the takedown mechanism in a textile loom, where the adjustable cushioning absorbs the rapid 30-800 mm/s cycling to protect the fabric tension system.
Operates a pivoting film roll clamp on a stretch wrapper, using the built-in magnet and DMSE sensor to confirm jaw position before the turntable spins.
Selecting this 50 mm bore makes sense when your application requires the 982 N push at 0.5 MPa, bridging the gap between the smaller 40 mm bore (628 N push) and the larger 63 mm bore (1559 N push). The CB double clevis mount is ideal for pivoting mechanisms requiring angular movement, ensuring the cylinder does not bind during stroke transitions.
Because this is a double-acting cylinder, it relies on continuous air pressure to move; it will drift if air is lost or the valve centers, so a BSE rod lock is required for fail-safe load holding. The PT1/4 port and M16x1.5 rod thread are standardized per ISO 15552, making it a direct replacement for other ISO 15552 cylinders without altering your mounting footprint.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X160SCB is dimensionally interchangeable per ISO 15552. You can drop it into existing footprints sharing the same 50 mm bore, 160 mm stroke, PT1/4 port, and CB clevis mounting dimensions without machining new plates.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.