
The AirTAC SE50 Standard Cylinder SE50X160SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 160mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X160SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Driven by filtered air over a 30-800 mm/s speed range, it utilizes a PT1/4 port and a Ø20 mm hard-chrome plated rod with an M16x1.5 thread. Its square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that mounts neatly against machine frames.
This unit includes a built-in magnet (-S) for non-contact position sensing via CMSE reed or DMSE electronic switches seated in the three-side sensor groove. Equipped with an FTC center trunnion mounting accessory, it features field-adjustable pneumatic cushioning at both ends to smoothly decelerate the piston near the stroke limits.
| Model | Airtac SE50 Standard Cylinder SE50X160SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push and 160 mm travel needed to form and square corrugated cardboard flaps on high-speed packaging lines.
Uses the FTC trunnion mount to pivot sorting gates smoothly across package handling conveyors without binding under side torque.
Secures aluminum castings inside machining centers, relying on the 825 N retract pull to release the part cleanly after cutting.
At 0.5 MPa, this 50 mm bore generates 982 N of push force. If your system requires less exertion, the 40 mm neighbor provides 628 N; for heavier demands, the 63 mm bore steps up to 1559 N. Because the 160 mm stroke is substantial, the unsupported piston rod is susceptible to bending under lateral loads, so incorporating an external guide alongside the FTC mount is advised. As a dimensionally interchangeable ISO 15552 component, it serves as a direct retrofit sharing standard mounting hardware. Note that the adjustable end cushions only decelerate motion; they do not hold a load if air pressure drops.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port with a 30 mm cushion length.
No, the adjustable air cushions only decelerate the piston near stroke ends and do not function as a brake. If the application must hold a load without live pressure, use a BSE rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.