
The AirTAC SE50 Standard Cylinder SE50X165 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 165mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X165 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush on modern machinery while resisting corrosion.
This specific SKU lacks a built-in magnet, meaning position sensing is not supported out of the box. Field-adjustable air cushioning at both stroke ends allows you to fine-tune deceleration, softening hard end stops during dynamic cycling.
| Model | Airtac SE50 Standard Cylinder SE50X165 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push at 0.5 MPa to secure aluminum castings against a CNC machining stop, relying on the 165 mm stroke to clear the work envelope fully.
Folds corrugated carton flaps with precise 825 N pull force, while the adjustable end cushion softens the tucking stroke to prevent board crushing.
Pivots a routing flap on a packaging line, leveraging the tie-rod-free profile body for tight side-frame mounting between conveyor belts.
If 982 N of push is too much for your fixture, step down to the 40 mm bore offering 628 N; if you need more clamping authority, step up to the 63 mm bore delivering 1559 N at 0.5 MPa. Because the 165 mm stroke exceeds the 300 mm threshold, the 20 mm rod and rod-bearing face higher bending moments under side loads—always use an external guide to prevent premature wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standard profile cylinders. Remember that a plain SE cylinder drifts when air is lost; for position holding without live pressure, specify a BSE rod lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, it provides 982 N push and 825 N pull. At 0.7 MPa, push increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa, with an operating speed range of 30-800 mm/s.
No, the SE50X165 is a standard double-acting cylinder and will drift if air is lost or the valve is centered. The adjustable air cushion only decelerates the piston near stroke end; for true position holding, use a BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.