
The AirTAC SE50 Standard Cylinder SE50X1650S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1650mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X1650S is a double-acting, single-rod ISO 15552 profile cylinder engineered for extended reach applications. It generates 982 N of push force at 0.5 MPa and accommodates a 1650 mm stroke, making it a made-to-order unit that exceeds the standard 1200 mm maximum. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors without requiring external hardware. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling.
| Model | Airtac SE50 Standard Cylinder SE50X1650S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 1650 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×1650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes heavy pallets across a wide transfer station using its 982 N thrust, while the 1650 mm stroke clears multi-lane conveyor widths without intermediate linkages.
Extracts totes from deep shelving units in automated retrieval systems, relying on the -S magnet and DMSE sensors to confirm full extension at extreme reach.
Actuates a large-format packaging carriage where the 1650 mm stroke accommodates oversized film rolls, utilizing adjustable end cushions to stop the heavy mass smoothly.
Selecting this 50 mm bore provides 982 N push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N push, while moving up to the 63 mm bore provides 1559 N push. Because the 1650 mm stroke is non-standard, expect a made-to-order lead time. To ensure a precise direct replacement for other ISO 15552 cylinders, verify the PT1/4 port, 50 mm bore, and your specific mounting accessory (such as an FA front flange or TC center trunnion).
At 1650 mm, the unsupported piston rod is highly susceptible to bending under side loads. An external guide mechanism is mandatory to prevent rod-bearing damage and premature seal failure. Furthermore, if the application must hold a vertical load without live air pressure, this cylinder will drift; an external pilot-operated check valve or a BSE rod lock variant is required for secure positioning.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X1650S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, provided you match the PT1/4 port and mounting interface. Note that the 1650 mm stroke is a non-standard made-to-order length.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.