verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X1660S

The AirTAC SE50 Standard Cylinder SE50X1660S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 1660mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke1660 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$306.37 $313.87Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X1660S

The AirTAC SE50X1660S is a double-acting, single-rod ISO 15552 profile cylinder engineered for extra-long linear reach. It generates 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, utilizing a 20 mm hard-chrome piston rod with an M16x1.5 thread. Because the 1660 mm stroke exceeds the 1200 mm standard maximum, this specific unit is manufactured as a made-to-order configuration.

The extruded aluminum barrel features a square profile without external tie rods, keeping the actuator compact and highly resistant to corrosion while allowing flush mounting on machinery. It includes a built-in magnet (-S) designed to interface seamlessly with AirTAC CMSE reed and DMSE electronic position sensors across its three integrated sensor grooves. Field-adjustable pneumatic cushioning at both ends allows mechanics to tune end-of-stroke deceleration, softening hard impacts during high-speed operations.

Airtac SE50 Standard Cylinder SE50X1660S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X1660S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke1660 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X1660S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×1660Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X1660S Is Used

conveyor_belt

Extrusion Line Transfer

Drives long-travel pusher arms on aluminum extrusion cooling tables, using its 982 N force to index heavy profiles between processing stations.

factory

Textile Tentering Frame

Actuates wide-span fabric guiding mechanisms, where the 1660 mm stroke accommodates broad material widths and the -S magnet tracks edge position.

straighten

Automated Storage Retrieval

Extends deep into high-bay warehouse shelving to push standardized totes, relying on the adjustable cushion to decelerate the long rod safely.

Is the Airtac SE50 Standard Cylinder SE50X1660S the Right Cylinder?

When sizing this 50 mm bore actuator, you can step down to a 40 mm bore for lighter payloads, which yields 628 N of push at 0.5 MPa, or step up to a 63 mm bore for heavier loads, providing 1559 N of push at 0.5 MPa. This SE50X1660S uses a PT1/4 port and requires an external guide to prevent rod-bearing bending under extended reach. As an ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, sharing standard mounting hardware like FA front flanges or LB foot brackets. Note that a standard SE cylinder cannot hold a load if air pressure is lost; if your application requires position holding without live pressure, consider the BSE rod-lock variant or an external pilot-operated check valve.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X1660S FAQ

This 50 mm bore cylinder generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum 200 kgf push at 1.0 MPa. The 1660 mm stroke exceeds the 1200 mm standard maximum, making it a non-standard, made-to-order item.

No, the field-adjustable air cushion at both ends only decelerates the piston near the stroke end and is not a locking mechanism. If unpowered, the piston will drift; for fail-safe load holding, use a BSE series rod lock or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X1660S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X1660S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.