
The AirTAC SE50 Standard Cylinder SE50X170 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 170mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X170 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush within confined machinery envelopes.
This 50 mm bore unit features field-adjustable air cushioning at both ends to soften hard end-stops at operating speeds up to 800 mm/s. Note that this specific SKU omits the -S magnet, meaning it arrives without built-in position sensing for AirTAC CMSE or DMSE switches.
| Model | Airtac SE50 Standard Cylinder SE50X170 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force required to smoothly fold and seal heavy cardboard flaps on continuous packaging lines at 170 mm stroke.
Actuates routing gates to redirect heavy pallets between conveyor lanes, utilizing the compact tie-rod-free profile to fit tight frame gaps.
Opens and closes safety machine doors, where the adjustable end cushions absorb the kinetic energy of the moving panel at high transit speeds.
Stepping down to the 40 mm bore reduces the 0.5 MPa push output to 628 N, whereas moving up to the 63 mm bore increases it to 1559 N. As a standard ISO 15552 cylinder, the SE50X170 serves as a direct dimensional replacement for equivalent 50x170 units from other manufacturers, utilizing a PT1/4 port and a 20 mm rod with an M16x1.5 thread. Since this model lacks a -S magnet, adding external limit switches is required for end-of-stroke confirmation. Furthermore, a standard SE cylinder relies on live air pressure to maintain its load; if air is lost or the valve is centered, the piston will drift. For positive holding, consider the BSE rod lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The AirTAC SE50X170 delivers a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, and it reaches a maximum push capacity of 200 kgf at 1.0 MPa.
Yes, the SE50X170 is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other 50 mm bore profile cylinders. It uses standard mounting hardware and shares the same PT1/4 port and M16x1.5 rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.