
The AirTAC SE50 Standard Cylinder SE50X170S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 170mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X170S is a double-acting, single-rod ISO 15552 profile cylinder delivering 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from workshop debris.
Because this unit includes the -S magnet code, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when cycling loads across the 170 mm travel.
| Model | Airtac SE50 Standard Cylinder SE50X170S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 982 N of push at 0.5 MPa to secure aluminum workholding pallets onto machining centers, using the magnet and DMSE sensors to verify clamp engagement.
Drives mechanical arms at 30-800 mm/s to fold corrugated cardboard flaps prior to sealing, relying on adjustable cushioning to prevent harsh stops at 170 mm.
Actuates a routing flap to sort packages on a logistics conveyor, benefiting from the tie-rod-free profile that tucks neatly within tight transfer gaps.
If 982 N of push at 0.5 MPa is too much for your fixture, step down to the 40 mm bore offering 628 N; if you need more clamping authority, step up to the 63 mm bore providing 1559 N. To retrofit an existing machine, match the 50 mm bore, 170 mm stroke, PT1/4 port, and your specific mounting accessory. Remember that a standard SE cylinder will drift and cannot hold a load if air pressure is lost—use a BSE rod lock for fail-safe positioning. Given the 170 mm stroke, side-load is minimal, but always verify rod-bearing loads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force reaches 1374 N. The maximum push force is 200 kgf at 1.0 MPa, and it operates at speeds between 30-800 mm/s.
Yes, the SE50X170S is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. It shares the standardized mounting interface and PT1/4 porting, though you should verify your specific mounting bracket and sensor compatibility.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.