
The AirTAC SE50 Standard Cylinder SE50X175SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 175mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X175SFTC is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a push force of 982 N at 0.5 MPa and a maximum output of 200 kgf at 1.0 MPa. It features a square extruded aluminum barrel without external tie rods, creating a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific configuration includes a built-in position magnet for CMSE reed or DMSE electronic sensors, paired with an FTC center trunnion mounting accessory. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling.
| Model | Airtac SE50 Standard Cylinder SE50X175SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push at 0.5 MPa needed to fold heavy cardboard flaps on continuous packaging lines, utilizing the 175 mm stroke to clear the product path during retraction.
Leverages the FTC center trunnion to pivot a diverting gate on a conveyor, absorbing lateral momentum while the adjustable cushion softens the 175 mm stroke end-stop.
Uses the built-in magnet with DMSE electronic sensors to confirm sample rack insertion at high cycling speeds, ensuring accurate positioning within the 30-800 mm/s range.
Selecting this 50 mm bore makes sense when your application requires roughly 982 N of push force at 0.5 MPa. If you need less power, stepping down to the 40 mm bore yields 628 N of push, while stepping up to the 63 mm bore provides 1559 N. Because this model carries the FTC trunnion mount, it pivots centrally to handle angular load shifts.
With a 175 mm stroke, the Ø20 mm rod and M16x1.5 thread provide a robust interface, though you must ensure the load is guided externally to prevent side-load bending on the rod bearing. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the rod. If your process loses air pressure, the load will drift unless you add a BSE rod lock or a pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder uses a PT1/4 port and generates a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE50X175SFTC is dimensionally interchangeable per ISO 15552. You can drop it in to replace other ISO 15552 profile cylinders using the same FTC mounting hardware and PT1/4 port connections without modifying the machine footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.