
The AirTAC SE50 Standard Cylinder SE50X180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 180mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X180S is a double-acting single-rod ISO 15552 profile cylinder engineered for precise linear motion. It delivers a robust 982 N push force at 0.5 MPa and 1374 N at 0.7 MPa, making it highly effective for mid-range automation tasks. Equipped with a built-in magnet, it seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for real-time position feedback.
Unlike traditional tie-rod designs, this unit features a square extruded aluminum barrel without external tie rods, offering a compact, corrosion-resistant body that mounts flush in tight machine cavities. The field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration via a screw, softening hard mechanical stops during high-speed operations.
| Model | Airtac SE50 Standard Cylinder SE50X180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force required to erect and fold heavy corrugated carton blanks on high-speed packaging lines.
Actuates diverting arms on conveyor networks, using the 180 mm stroke to push heavy product loads cleanly off the main belt.
Utilizes the built-in magnet and DMSE sensors to confirm arm extension and retraction during automated machine tool changing.
If your application requires less force, stepping down to the 40 mm bore yields 628 N of push at 0.5 MPa, whereas stepping up to the 63 mm bore provides 1559 N for heavier loads. To replace an existing ISO 15552 cylinder, match the 50 mm bore, 180 mm stroke, PT1/4 port, and your required mounting accessory. Because this unit includes the -S magnet, it is fully ready for CMSE or DMSE position sensing. At 180 mm of travel, the 20 mm rod handles moderate side loading, though long unsupported strokes should always use an external guide to prevent rod-bearing bending. Note that this cylinder does not hold a load if air pressure is lost; use a BSE rod lock for fail-safe holding.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X180S generates 982 N of push and 825 N of pull at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes, the SE50X180S is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders by matching the 50 mm bore, 180 mm stroke, and PT1/4 port, sharing standard mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.