
The AirTAC SE50 Standard Cylinder SE50X185 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 185mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X185 is a double-acting, single-rod ISO 15552 profile cylinder delivering 982 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting debris buildup.
This 50 mm bore unit features field-adjustable air cushions at both ends to soften end-of-stroke impacts at speed, operating across a 30-800 mm/s range. Note that this specific SKU lacks the built-in magnet (-S) required for CMSE or DMSE position sensing, so external limit switches are needed if electronic feedback is required.
| Model | Airtac SE50 Standard Cylinder SE50X185 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push at 0.5 MPa required to fold and secure heavy corrugated cardboard flaps on continuous packaging lines.
Actuates a routing gate along a 185 mm stroke to divert filled beverage bottles between parallel conveyor belts.
Shifts the safety enclosure on a CNC lathe, using the no-tie-rod profile to mount flush against the machine's sliding frame.
This 50 mm bore provides 982 N push at 0.5 MPa; if your application requires less force, the 40 mm neighbor offers 628 N, while stepping up to the 63 mm bore yields 1559 N for heavier payloads. Because this SKU lacks the -S magnet, you cannot use AirTAC CMSE or DMSE sensors for position detection without external hardware. As a standard ISO 15552 cylinder, it serves as a direct dimensional replacement for other ISO 15552 profile cylinders, matching the 50 mm bore, 185 mm stroke, PT1/4 port, and standard mounting accessories. For this 185 mm stroke, the Ø20 mm rod handles moderate side loads, but longer unsupported strokes approaching 300 mm or beyond will require an external guide to prevent rod-bearing bending.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X185 provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum operating pressure is 1.0 MPa, where it achieves a maximum push of 200 kgf.
Yes, the SE50X185 is dimensionally interchangeable per ISO 15552 standards, allowing it to direct replace other 50 mm profile cylinders without altering mounting hardware. It features a PT1/4 port and adjustable air cushions at both ends, but note this specific SKU lacks a sensor magnet for CMSE/DMSE switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.