verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X185S

The AirTAC SE50 Standard Cylinder SE50X185S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 185mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke185 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$85.83 $93.33Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X185S

The AirTAC SE50X185S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa across its 185 mm stroke. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush within confined machinery envelopes. This clean profile design directly simplifies mechanical integration while maintaining the standardized VDMA 24562 mounting interface.

Equipped with a built-in magnet (the -S option), this unit readily interfaces with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration via a set screw, softening impacts when moving loads at operational speeds up to 800 mm/s.

Airtac SE50 Standard Cylinder SE50X185S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X185S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke185 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X185S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×185Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X185S Is Used

package_2

Carton Erector Arms

Drives the folding arms on continuous-motion carton erectors, using the 982 N push force to reliably square heavy board blanks at cycle rates demanding 800 mm/s speeds.

conveyor_belt

Pallet Diverters

Actuates pop-up transfer gates on packaging conveyors, where the 185 mm stroke provides the exact reach to redirect loaded pallets smoothly onto spur lines.

precision_manufacturing

CNC Fixture Clamps

Secures rough-cast aluminum blocks inside CNC machining centers, utilizing the integrated -S magnet and DMSE sensors to confirm clamp engagement before the spindle starts.

Is the Airtac SE50 Standard Cylinder SE50X185S the Right Cylinder?

When sizing this 50 mm bore actuator, evaluate your thrust margins: stepping down to the 40 mm bore reduces push force to 628 N at 0.5 MPa, while upgrading to the 63 mm bore increases it to 1559 N. Because the 185 mm stroke is non-standard but falls well under the 1200 mm maximum, it is supplied as a made-to-order length. To retrofit an existing fixture, match the 50 mm bore, 185 mm stroke, PT1/4 port, and specify the -S magnet for sensor tracking. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load if air pressure drops. For position holding without live pressure, consider the BSE rod lock variant.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X185S FAQ

The SE50X185S generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N. The maximum allowable push force is 200 kgf at 1.0 MPa operating pressure.

Yes, the SE50X185S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing machinery using the same mounting hardware and PT1/4 porting, provided you pair the built-in magnet with AirTAC CMSE or DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X185S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X185S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.