
The AirTAC SE50 Standard Cylinder SE50X192S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 192mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X192S is a double-acting, single-rod ISO 15552 profile cylinder with a 50 mm bore and 192 mm stroke. It delivers a robust 982 N push force at 0.5 MPa, making it well-suited for mid-range industrial actuation. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a built-in magnet (-S) for non-contact position sensing with AirTAC CMSE (reed) and DMSE (electronic) switches. The field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s operations.
| Model | Airtac SE50 Standard Cylinder SE50X192S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 192 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×192 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N push force to swing a diverter arm on a packaging conveyor, routing cartons at speeds up to 800 mm/s.
Opens and closes heavy machine tool safety doors, leveraging the flush extruded profile to save space in tight enclosures.
Secures test specimens in a materials testing rig, using the -S magnet and a DMSE electronic sensor to confirm clamp closure.
This 50 mm bore generates 982 N push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N push, whereas upgrading to the 63 mm bore provides 1559 N push for heavier loads. Because the 192 mm stroke is a non-standard made-to-order length, expect a brief lead time.
As a standard double-acting cylinder, the SE50X192S will drift if air pressure is lost or the valve is centered; it cannot hold a load vertically without live pressure. For position-holding safety, consider the BSE rod lock variant. Furthermore, while the 20 mm rod handles normal side loads well, a 192 mm stroke places leverage on the rod bearing; use an external guide rail to prevent bending under heavy offset loads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes. The SE50X192S is dimensionally interchangeable per the ISO 15552 standard, meaning it shares identical mounting footprint and port dimensions (PT1/4) for direct retrofits.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.