
The AirTAC SE50 Standard Cylinder SE50X192SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 192mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X192SN is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a push force of 982 N at 0.5 MPa and a maximum push capacity of 200 kgf at 1.0 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The 192 mm stroke on this unit is a non-standard made-to-order length, tailored for specific spacing requirements.
This model includes a built-in magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches, which seat neatly into the sensor grooves on three sides of the body. It uses an NBR seal for reliable pneumatic operation at standard temperatures, and the field-adjustable air cushioning at both ends allows technicians to dial in the exact deceleration needed to soften hard end stops at operating speeds up to 30-800 mm/s.
| Model | Airtac SE50 Standard Cylinder SE50X192SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 192 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×192 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the precise 982 N push at 0.5 MPa required to fold and secure corrugated cardboard flaps on high-speed packaging lines.
Utilizes the 192 mm stroke to actuate a routing gate, pushing parcels smoothly between sorting lanes at speeds up to 800 mm/s.
Leverages the compact tie-rod-free profile and adjustable end cushions to open and close heavy machine tool doors without impact shock.
When sizing this actuator, stepping down to a 40 mm bore drops the 0.5 MPa push force to 628 N, while stepping up to a 63 mm bore increases it to 1559 N. This 50 mm bore provides a strong middle ground for mid-range loads. Because the 192 mm stroke is a non-standard made-to-order size, confirm lead times during procurement. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, accepting standard mounting accessories like FA front flanges or LB foot brackets. The porting is PT1/4.
Remember that a plain SE cylinder does not hold its position or load when air is lost or the valve is centered; the piston will drift. If your application requires static load holding without live pressure, consider the BSE rod lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push capacity is 200 kgf at 1.0 MPa. The pneumatic port size is PT1/4.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end; it is not a locking mechanism. If air pressure is lost or exhausted, the piston will drift. For load-holding requirements, use the BSE rod lock variant or an external locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.