
The AirTAC SE50 Standard Cylinder SE50X195 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 195mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X195 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Driven by filtered air over a 195 mm stroke, it operates efficiently between 0.15 and 1.0 MPa with a speed range of 30-800 mm/s. This bore size features a PT1/4 port, a 20 mm hard-chrome rod, and an M16x1.5 rod-end thread.
The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed cycling. Because this specific SKU lacks the built-in -S magnet, it does not directly support AirTAC CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X195 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a packaging line conveyor, using the 195 mm stroke to swing the gate and redirect bottles at high speed.
Drives a mechanical arm to fold corrugated carton flaps prior to tape sealing, utilizing the 982 N push force to overcome board stiffness.
Pushes small stamped metal parts out of a lower die mold, relying on the 825 N retract force to pull the rod back clear of the tooling.
Selecting this 50 mm bore makes sense when an application requires roughly 1000 N of thrust at 0.5 MPa. If your load is lighter, stepping down to the 40 mm bore drops the push force to 628 N, while upgrading to the 63 mm bore increases it to 1559 N. This SE50X195 configuration uses a PT1/4 port, standard basic mounting, and no sensor magnet. Because the 195 mm stroke approaches the mid-range of the standard catalog, it provides ample travel without requiring a non-standard made-to-order wait time.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders for straightforward retrofits. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking mechanism. If the machinery loses air pressure, the cylinder will drift, requiring an external pilot-operated check valve or a BSE rod lock variant to hold the load safely.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X195 delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, and the maximum push force is 200 kgf at 1.0 MPa. This 50 mm bore cylinder uses a PT1/4 port.
Yes, the SE50X195 is dimensionally interchangeable per ISO 15552 standards. Its mounting interface and envelope dimensions match other ISO 15552 profile cylinders, allowing for a direct replacement using your existing mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.