
The AirTAC SE50 Standard Cylinder SE50X20 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 20mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X20 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation. It delivers a robust 982 N push force at 0.5 MPa alongside an 825 N retract force, making it highly effective for short-stroke clamping and ejection tasks.
Built with a square extruded aluminum barrel that eliminates external tie rods, the body is inherently corrosion-resistant and mounts flush against machine frames. The field-adjustable air cushion at both ends can be tuned to soften end-of-stroke impacts, though with a 20 mm stroke the piston travels a very short distance before reaching the cushioning phase.
| Model | Airtac SE50 Standard Cylinder SE50X20 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 982 N of clamping thrust at 0.5 MPa to hold sheet metal dies firmly in place during short-stroke bending operations.
Cycles through a 20 mm stroke to close sealing jaws rapidly, utilizing the 30-800 mm/s speed range for high-throughput packaging lines.
Delivers a quick 825 N retract pull to eject machined parts from CNC fixtures without lingering in the work zone.
If your application requires slightly less force, stepping down to the 40 mm bore yields a 628 N push at 0.5 MPa, while moving up to the 63 mm bore provides 1559 N of thrust. This SE50X20 configuration uses a PT1/4 port, a 20 mm rod with an M16x1.5 thread, and ships without a position sensor magnet. Note that a standard SE cylinder will drift if air pressure is lost; for load-holding safety, consider the BSE rod lock variant. Because the stroke is only 20 mm, side-load stress on the rod bearing is minimal.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X20 generates a 982 N push force and an 825 N pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X20 is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders using the same 50 mm bore and mounting footprint without requiring custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.