verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X200SCB

The AirTAC SE50 Standard Cylinder SE50X200SCB is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke200 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$96.27 $103.77Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X200SCB

The AirTAC SE50X200SCB is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. It features a square extruded aluminum barrel without external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames. This clean profile design eliminates protruding rod hardware, reducing snag risks in tight automated cells.

Equipped with a built-in magnet for CMSE reed and DMSE electronic position sensors, this unit supports precise end-of-stroke detection. The included CB double clevis mounting accessory allows pivoting articulation, while field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration and soften hard end stops during high-speed cycling.

Airtac SE50 Standard Cylinder SE50X200SCB Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X200SCB
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke200 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X200SCB

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X200SCB Is Used

package_2

Carton Flap Folding

Provides 982 N of push at 0.5 MPa to reliably fold heavy corrugated carton flaps on continuous packaging lines, utilizing the CB clevis for smooth angular articulation.

conveyor_belt

Sorter Diverter Arms

Drives pivoting diverter gates on logistics conveyor belts where the 200 mm stroke pushes parcels laterally without tying up valuable floor space.

science

Lab Sample Indexing

Actuates rotary indexing tables for laboratory sample handling, relying on DMSE solid-state sensors and the adjustable cushion to gently decelerate delicate loads.

Is the Airtac SE50 Standard Cylinder SE50X200SCB the Right Cylinder?

If your mechanism requires less thrust, stepping down to the 40 mm bore yields 628 N of push at 0.5 MPa, whereas escalating to the 63 mm version provides 1559 N. The CB double clevis mount on this 50 mm bore is ideal for pivoting shafts, but remember that a plain SE cylinder does not hold its load when air is exhausted or the valve is centered; the piston will drift. For position-holding safety, consider the BSE rod lock variant. Because the 200 mm stroke is substantial, the 20 mm rod and thread experience bending moments under side loads; always utilize an external guide rail to prevent premature bearing wear.

As a dimensionally interchangeable ISO 15552 component, this cylinder serves as a direct replacement for other ISO 15552 cylinders, sharing standardized mounting interface dimensions. It uses a PT1/4 port, a 20 mm hard-chrome rod, and an M16x1.5 rod-end thread.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X200SCB FAQ

This 50 mm bore cylinder generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N, and it reaches a maximum push of 200 kgf at 1.0 MPa.

Yes, the SE50X200SCB is dimensionally interchangeable per ISO 15552 standards, meaning it shares standard mounting interface dimensions for direct replacement. The CB double clevis and PT1/4 port match the standardized footprint, and the built-in magnet works seamlessly with AirTAC CMSE and DMSE sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X200SCB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X200SCB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.