
The AirTAC SE50 Standard Cylinder SE50X200SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X200SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Equipped with an FTC mounting accessory and a built-in magnet (-S), it integrates seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke positioning.
Its square extruded aluminum barrel eliminates external tie rods, offering a flush, corrosion-resistant profile that simplifies mounting and protects against workshop debris. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts during high-speed 200 mm strokes.
| Model | Airtac SE50 Standard Cylinder SE50X200SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Driving the 200 mm stroke to fold heavy cardboard carton flaps, utilizing the 982 N push force at 0.5 MPa to cleanly seal packaging lines.
Mounting via the FTC accessory to pivot diverter arms on a conveyor belt, relying on the CMSE sensor magnet for accurate stroke confirmation.
Securing raw aluminum billets inside a CNC machining center, where the adjustable cushion softens the 30 mm cushion length impact at cycle end.
If your application requires slightly less force, the 40 mm bore provides 628 N of push at 0.5 MPa; stepping up to the 63 mm bore yields 1559 N for heavier loads. Because this is a double-acting cylinder, it relies on continuous live air pressure to move and hold the load—if air is lost or the valve centers, the piston will drift. For position holding without pressure, consider the BSE rod-lock variant.
The standardized ISO 15552 footprint ensures this 50 mm bore, 200 mm stroke, PT1/4 ported cylinder is dimensionally interchangeable with other ISO 15552 profile cylinders. The Ø20 mm rod and M16x1.5 thread provide robust side-load resistance, but for this 200 mm stroke, ensure your external guide supports any heavy lateral loads to prevent rod-bearing bending.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X200SFTC delivers a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at the maximum operating pressure of 1.0 MPa.
Yes, the SE50X200SFTC is dimensionally interchangeable per ISO 15552 standards, serving as a direct replacement for other ISO 15552 profile cylinders. The built-in -S magnet is specifically designed to work with AirTAC CMSE reed switches and DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.